Advanced Search
column
3D transient ignition simulation and analysis of flame propagation asymmetry in solid rocket motors
WANG Junjie, ZHANG Zhongzhe, XIONG Yongliang
2026, 49(3): 333-343. DOI: 10.7673/j.issn.1006-2793.2026.03.001
Abstract PDF
Calculation of non-equilibrium tail-flame characteristics in solid rocket motors(Ⅰ) —Influence mechanisms of propellant formulations
PENG Moding, LIU Yang, ZOU Yuxuan, ZHANG Ruitao, YU Xiaojing
2026, 49(3): 344-356. DOI: 10.7673/j.issn.1006-2793.2026.03.002
Abstract PDF
Theoretical performance analysis of Al-Mg-B alloy fuels in three propulsion systems
HUO Dongxing, ZONG Tingjun, YANG Yuxin, HUANG Likeng
2026, 49(3): 357-362. DOI: 10.7673/j.issn.1006-2793.2026.03.003
Abstract PDF
Influence of particle size and shape on performance of reverse displacement piston powder feeding device
LI Junyan, HUANG Xi, HUA Cong, CHU Yue, LIU Pingan
2026, 49(3): 363-369. DOI: 10.7673/j.issn.1006-2793.2026.03.004
Abstract PDF
Interior ballistic performance of conical-grain solid rocket motor under lateral overload
SUN Xing, SHENG Zhaohua, WANG Junlong, WANG Xuekun, LI Jia
2026, 49(3): 370-377. DOI: 10.7673/j.issn.1006-2793.2026.03.005
Abstract PDF
Deformation analysis of radially grooved propellant grain in initial ignition stage based on fluid-solid interaction
CHENG Shi, GAN Xiaosong, BAI Yanjun, CHAO Kan
2026, 49(3): 378-387. DOI: 10.7673/j.issn.1006-2793.2026.03.006
Abstract PDF
Sensitivity and reliability evaluation of structural parameters of grain under sequential loading
MENG Junting, LIU Xiangyang, WANG Jiangtao, ZHANG Xu, ZHANG Yuan, WANG Ningfei
2026, 49(3): 388-397. DOI: 10.7673/j.issn.1006-2793.2026.03.007
Abstract PDF
Comment on: Propellant stress intensity factor measurement using high-accuracy 2D-DIC
XU Jinsheng
2026, 49(3): 398-398. DOI: 10.7673/j.issn.1006-2793.2026.03.008
Abstract PDF
Propellant stress intensity factor measurement using high-accuracy 2D-DIC
WANG Zhuo, YU Liping, PAN Bing, CUI Huiru
2026, 49(3): 399-408. DOI: 10.7673/j.issn.1006-2793.2026.03.009
Abstract PDF
Three-dimensional finite element reconstruction method for solid propellant based on real spatial distribution
WANG Yanchao, SHI Feng, ZHAO Zhipeng, BAI Jianfang, DUAN Leiguang, WANG Xueren
2026, 49(3): 409-417. DOI: 10.7673/j.issn.1006-2793.2026.03.010
Abstract PDF
Multiscale analysis and constitutive modeling of the creep behavior of composite solid propellants under solid content control
FENG Shuaixing, WANG Xueren, MA Ju, ZHOU Weiyong, WEI Haibo, PAN Jin
2026, 49(3): 418-426. DOI: 10.7673/j.issn.1006-2793.2026.03.011
Abstract PDF
Synthesis and characterization of a branched substituted phenolic stabilizer
DUAN Mingxing, HU Xiuli, ZHANG Tao, ZHOU Weiliang, XIAO Leqin
2026, 49(3): 427-432. DOI: 10.7673/j.issn.1006-2793.2026.03.012
Abstract PDF
Microstructure and thermophysical properties of reduced dgraphene oxide modified C/C composites
HU Xinyi, HAN Liyuan, ZHANG Yulei, CAO Yongbo, WU Tao
2026, 49(3): 433-441. DOI: 10.7673/j.issn.1006-2793.2026.03.013
Abstract PDF
Influence of C/C density on the ablation performance of C/C-SiC composites prepared by reactive melt infiltration
WU Xiaojun, WANG Kunjie, ZHANG Xiyan, HU Yijie
2026, 49(3): 442-450. DOI: 10.7673/j.issn.1006-2793.2026.03.014
Abstract PDF
Storage life evaluation of silicone rubber based on rebound velocity
YIN Yixue, SHI Zhiwei, LI Yaze, LI Yuehuan, WANG Jianfei, XU Jinsheng, HUANG Wei
2026, 49(3): 451-458. DOI: 10.7673/j.issn.1006-2793.2026.03.015
Abstract PDF
Preparation and properties of a pre-coated solvent-free adhesive for EPDM insulation bonding
LI Susu, YUAN Shuangchun, LI Wei, YUAN Jianmin, LI Qiang, WANG Dengke, YAO Wenhui, YU Yao, LIU Chao, WU Yuhang
2026, 49(3): 459-467. DOI: 10.7673/j.issn.1006-2793.2026.03.016
Abstract PDF
Temperature simulation and experiment of centrifugal mixing process for high viscosity fluid slurry
WU Rui, DU Xinli, DUAN Junhong, GAO Meng, WU Weixiao, LI Xiwen
2026, 49(3): 468-476. DOI: 10.7673/j.issn.1006-2793.2026.03.017
Abstract PDF
Research on testing the constant pressure combustion temperature of propellants by calorimetry
WANG Yinghong, CONG Junhao, LIANG Chao, JIANG Bowen, LYU Yiqin, WANG Fang
2026, 49(3): 477-483. DOI: 10.7673/j.issn.1006-2793.2026.03.018
Abstract PDF
Influencing factors of laser shearography non-destructive testing of solid propellant
LIU Shuwang, LIU Bin, WANG Daolin, ZHAN Mingming, JIAN Qiwei
2026, 49(3): 484-490. DOI: 10.7673/j.issn.1006-2793.2026.03.019
Abstract PDF